3D Stereo Camera Rigs and Sync

Stereo pictures general talk

Moderator: alex

3D Stereo Camera Rigs and Sync

Postby rucnd3d » Thu Jan 21, 2016 11:16 pm

I have 2 Sony A5000's for my stereo rig.
And 2 IR shutter releases to sync up the shutters.
Looked like all was working just fine until I uploaded some stereo action images to my computer and starting layering them for 3D alignment. fast movement is always out of sync. Did some heavy internet research and discovered that this is a known issue with CMOS digital cameras. Its not the remote shutter release. Apparently the rolling shutter that actually captures the image is never really synced with the other camera. not matter what you do, the two images are almost never taken at the same time. We're talking fractions of a second, but its enough to make action shots worthless. even fluttering flags and water falls never match up. this is sad.
The solution seems to rely on $400 gadgets like lanc sheppard and software hacks like stereo data maker, many of which only work on outdated digital cameras.

My question is to all of you stereo rig experts and hobbyists. How have you dealt with or overcome this issue? Is their an affordable solution? Or do you just avoid action shots all together?
Lastly, do any of you use the new Sony mirrorless cameras like mine, and is there a tool made the precisely sync the two rolling shutters?

Thanks in advance for your input
Sincerely
Dan out of sync
User avatar
rucnd3d
 
Posts: 13
Joined: Tue Dec 30, 2014 5:57 pm

Re: 3D Stereo Camera Rigs and Sync

Postby ANSI » Fri Jan 29, 2016 6:01 pm

Kúla Inventions Ltd
User avatar
ANSI
 
Posts: 1
Joined: Thu Jan 21, 2016 2:15 pm

Re: 3D Stereo Camera Rigs and Sync

Postby joshn » Mon Mar 07, 2016 5:20 am

I am using Canon S110 cameras (the S110 from 2012, not the ancient Canon Elph S110) and they are synced using modified CHDK code to within 0.3 milliseconds. (The Canon S110 are available on Ebay for well under $200US each and have pretty good image quality for a P&S, though not as good as a Sony A5000 of course). They are controlled through a master/slave configuration so the aperture/iso/exposure etc. settings are synced between the master camera and slave camera(s) as is the shutter sync (communication is via the autofocus led which is connected to the slave cameras' center battery terminal (normally for thermistor input) through a photo-diode with no modifications of the camera required). The modified CHDK code does work well enough but I haven't completely finished adding features to it yet.

I don't think it is necessarily to do with the fact that it is CMOS-based, I'm pretty sure rolling-shutter only matters during video when the physical shutter is open all the time or does the Sony A5000 being a mirrorless not actually have a physical shutter? It is most probably similar to the arbitrary delay in processing between the camera beginning the shot and the shutter actually opening on the Canon P&S cameras, which someone on the CHDK forums got around by writing some code to get the cameras to pause just before opening the shutter until a sync signal was received by both cameras (which I then used in the modifications I made). Not sure if a similar solution exists for Sony cameras though.
User avatar
joshn
 
Posts: 1
Joined: Mon Mar 07, 2016 4:46 am

Re: 3D Stereo Camera Rigs and Sync

Postby SLZZZ » Mon Mar 14, 2016 11:12 am

rucnd3d wrote:I have 2 Sony A5000's for my stereo rig.
And 2 IR shutter releases to sync up the shutters.


Image
Image



hope I helped :)
User avatar
SLZZZ
 
Posts: 2
Joined: Mon Mar 14, 2016 11:04 am

Re: 3D Stereo Camera Rigs and Sync

Postby 57f745ea8884280a06000004 » Sun Oct 09, 2016 2:33 pm

But did you measure the time-difference between your exposures? If you just short-circuit remote-release terminals of two cameras, it doesn't guarantee synchronisation. The IR release should be even worse (and I didn't know A5000 supports it).
We are developing a more or less serious dual-camera solution, and with a delay circuit we are able to achieve the difference within 10 milisec. Less than that doesn't appear to be reasonably feasible - there are deviations in a camera itself. Our rigs have two Sony E-mount cameras, not necessarily the same model.
If you need action shots, flash is the way to go. Make the exposure longer than your synchronisation error, or course.
User avatar
57f745ea8884280a06000004
 
Posts: 2
Joined: Sat Oct 08, 2016 9:03 am

Re: 3D Stereo Camera Rigs and Sync

Postby rucnd3d » Mon Jan 30, 2017 4:16 pm

57f745ea8884280a06000004 wrote:But did you measure the time-difference between your exposures? If you just short-circuit remote-release terminals of two cameras, it doesn't guarantee synchronisation. The IR release should be even worse (and I didn't know A5000 supports it).
We are developing a more or less serious dual-camera solution, and with a delay circuit we are able to achieve the difference within 10 milisec. Less than that doesn't appear to be reasonably feasible - there are deviations in a camera itself. Our rigs have two Sony E-mount cameras, not necessarily the same model.
If you need action shots, flash is the way to go. Make the exposure longer than your synchronisation error, or course.

I get the flash photography workaround. Open both shutters and let the flash paint the picture. Did some action shots of pets this way, but it has to almost totally dark to do it.
Did not measure the time difference between photos. All my tests are by sight only. (guess and test shots of a TV CRT tube, spinning fans, cars driving by etc)
The A5000 only has the multi port, and I bought 3rd party IR remote that plugs into multi port to remote trigger.
Can you/anyone explain this delay circuit? And is it something I can get use for my A5000 cameras?
User avatar
rucnd3d
 
Posts: 13
Joined: Tue Dec 30, 2014 5:57 pm

Re: 3D Stereo Camera Rigs and Sync

Postby kano3d » Mon Apr 10, 2017 4:57 pm

I'm working on my own 3D rig. I found 2 alternatives for what I want: the Lumix FZ300 or the FZ1000, sure the fz1000 is better, but is more weight to carry on. I have planned all components but I don't know where to find a duplicator for remote cable.
User avatar
kano3d
 
Posts: 20
Joined: Sun Jul 26, 2015 10:39 pm

Re: 3D Stereo Camera Rigs and Sync

Postby 586d850f888428e371000002 » Tue May 16, 2017 8:27 pm

The cheapest, and free synchronization is Stereo Data Maker software, based on CHDK.
http://sdm.camera/index.htm
It is for a selection of Canon cameras but that list includes the EOS M3. Sychronization is excellent. Freeze splashing water etc.
A more expensive solution is using a pair of Samsung NX1000 or NX1100 cameras. These can be linked with a patched pair of remote cables. The drawback is that these cameras are now very scarce and the prices have jumped quite a bit since it was discovered how well they work on stereo rigs.
http://www.stereocamera.ca/StereoSamsung.html
User avatar
586d850f888428e371000002
 
Posts: 1
Joined: Tue May 16, 2017 8:14 pm

Re: 3D Stereo Camera Rigs and Sync

Postby josebarbera » Tue May 01, 2018 10:42 am

Last weekend two cables (male and female) arrived from China to me, for the multi-terminal port of the latest models of Sony cameras.

With a little help from my friends (as the Beatles song :) of a well-known electronic store in Elche, now I can confirm that these two cables can get a perfect synchronization (no needing an external trigger) in, at least, three Sony Alpha cameras (A5100, A6000 and A7S). I think that can be also possibly in other two dozens of Sony cameras models (the Alpha and ... also the Cyber-Shot?).

I am very excited because, suddenly, I have the possibility of obtaining extraordinary 3D equipment, very powerful and cheap, and much better than any new 3D camera, because these Sony twined cameras allow shooting with a variable stereobase (not possible with any future two-lens camera).

As we all know the exposure depends on three inter-related variables (aperture, speed and ISO), and also the depth depends on other three inter-related variables (stereobase, focal distance, and distance to near object).

For this reason, if a variable is not adequate (here the excessive stereobase, excepte in the portrait mode) we can compensate that modifying the other two variables of the triangle:

a) increasing the distance to near object
or
b) decreasing the focal distance.

It think can be absurd to reject the stereobase of this Sony stereo rigs, (and can be a obvious non sense to mutilate the cameras !), because we not need a 6.5 cm stereobase: we only need to change the lenses (searching other focal distance) for compensate that.




I got a message from Randy Hester, here, in Phereo, few days ago:

http://phereo.com/image/5ab16f40e7e564e72100020d

“the biggest difference id the Sony uses a proprietary multi-port connector for the focus and shutter pins. It's much harder to find than a standard USB connector but can be ordered online”.

I looked for a female Sony multi-terminal cable (Female-S2, replacement for Sony RM-SPR1 Cable) and I only found it in China, but avaiable through Amazon Spain:

DSLRKIT E3 F-S2 (Female)
https://www.amazon.es/gp/product/B00M6N ... UTF8&psc=1

DSLRKIT 2.5-S2 (Male)
https://www.amazon.es/s/ref=nb_sb_noss? ... IT+2.5-S2+


The S8 cables, male and female, are compatible with several advanced Sony cams (today 39 models):

http://support.d-imaging.sony.co.jp/www ... lang=es_ES

Sony Alpha:
A7 / A7R /A7S/ A9 / (and mark II, III)
A3000/A3500/
NEX-3NL / A5000 / A5100 / A6000 / A6300 / A6500 /
A58 / A68 /A77II /A99II/

Sony Cyper-Shot:
RX1RII /
RX10II , III, IV /
RX100II , III, IV, V /
HX300 / HX350 / HX400 /
HX50 / HX60 / HX80 / HX50 / HX90 /
WX500 /
ILCE-QX1 /

I not know if the synchronization works well at all the Sony cameras with multi-terminal port. I only can confirm the sync with 3 models indicated above: A5100, A6000 and A7S (until ISO 400.000!).

In any case, each 3D photo lover can make the appropriate checks, only under their own risk.

Now (May 1) a new era in 3D photography begins, (at least for me, excited and happy): The Sony Multi-terminal Era.

Thank you Sony !!!
User avatar
josebarbera
 
Posts: 19
Joined: Wed Jun 05, 2013 12:37 pm

Re: 3D Stereo Camera Rigs and Sync

Postby rucnd3d » Thu May 03, 2018 11:01 pm

Thanks josebarbera,
I saw Randy's Photo's of his A5100 rig and got inspired real fast! I spliced my 2 seperate triggers into one trigger. Now am doing extensive testing but it looks like both cameras are very well synced up! Very exicited about this.
User avatar
rucnd3d
 
Posts: 13
Joined: Tue Dec 30, 2014 5:57 pm

Next

Return to General Discussion